Induline SW-966

The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

Permitted wood moisture content: u < 18%

Stir well.

Apply with a brush, roller or by spraying.

Airless spraying: nozzle size: 0.38 mm; spraying pressure: 80-100 bar (use yellow pistol filter)

Airmix spraying: Nozzle: 0.28 mm, material pressure: 80 - 100 bar, air pressure: 1.2 - 2.0 bar

Flow cup gun: nozzle 2.5 mm, atomiser air pressure: 1.8 - 2.0 bar.

Seal opened containers well and use contents as soon as possible.

Check colour, adhesion and compatibility with the substrate by setting up a trial area.

Before coating technically modified woods and wood-based materials, apply the product to a trial surface and conduct a suitability test on the desired area of use.

Ready for overcoating: after approx. 2 hours

Practice values at +20 °C and 65% relative humidity.

Low temperatures, poor ventilation and high humidity delay drying.

Airless and airmix spraying equipment, flow cup gun, paintbrush and roller

Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.

Ensure that any residue from cleaning is disposed of correctly.

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

80 - 120 ml/m² depending on the absorbency of the substrate

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.