• Clean Galena

    Article No. 066101

    Clean Galena max

    Cleaner for emission-free cleaning of mineral surfaces

    0661 | Clean Galena max
    Size / Quantity



    Product specifications

    On delivery

    Density (20°C) 1.18 g/ml
    pH value Approx. 10.0

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls/ceilings indoors and outdoors
    • For professional users only
    • Adjusting the intensity and drying properties of Clean Galena neutral
    • Mineral surfaces, in particular limestone
    • Reduction of heavy metals, in particular lead
    • Reduction of encrusted dirt
    • Removal of stains caused by iron or copper compounds
    • For use by professionals


    • Water-based
    • Maximum content of active cleaning substances
    • Gentle cleaning
    • Emission-free
    • Dries to form an easily removable skin that binds surface impurities
    • Binds impurities in the surface
    • Complexes heavy metals
    • Preparation
      • Substrate requirements

        Stable and free of dust.

        The substrate must be free from biological contamination such as moss, algae and mould.

      • Preparations

        Use a suitable tool to coarsely clean off the substrate.

        Set up a trial area to determine the cleaning effect.

        Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

        Thoroughly pre-wet the substrate.

    • Application instructions
      • Please contact Remmers Technical Service (phone +49 5432 83900) before applying with machine processing.

        The drying time depends on the substrate, the coating thicknesses and the climate conditions.

    • Working tools / cleaning
      • Brush / Filling knife / Smoothing trowel / Airless spraying gun
      • Paintbrush, scraper, smoothing trowel, airless spraying equipment, peristaltic pumps

      • Clean tools immediately after use with water and detergent.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 2 - 3 kg/m² on even surfaces Standard wet film thickness 2.5 mm

      • Determine the precise application rate on a sufficiently large, representative trial surface.

        When mixing with Clean Galena neutral, the application rate is reduced according to the mixing ratio.

    • General information
      • Always set up a sufficiently large, representative trial area or areas!

        Deviations from applicable regulations must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

        Any material that is contaminated after application must be disposed of in accordance with the applicable regulations.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.


    Different variants