Article No. 108025
PCC (RM) fine filler
Product specifications
On delivery
7 d: ≥ 25 N/mm²
28 d: ≥ 30 N/mm²
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Concrete replacement according to
- DIN EN 1504-3 - Evening out concrete surfaces
- Repair of pores, missing and broken out areas
- Interior and exterior use
Properties
- High sulphate resistance and low active alkali content (SR/NA)
- High early strength
- Good smoothing and adhesion properties
- Low-stress and crack-free setting
- Well suited to overhead working
-
Preparation
-
Preparations
Concrete surface:
Stable, clean, dust-free
Observe the applicable technical regulations for the following parameters:
- Adhesive pull strength of the substrate
- Minimum roughness/roughness depthPre-wet the substrate so that it is slightly moist.
-
-
Application
-
Working time
(+20 °C): Approx. 60 minutesLayer thickness
Single layer 1 - 10 mm
Single layer in broken-out areas up to 30 mm
Using a suitable tool, apply the product as a contact layer.
Smooth the surface using a suitable tool.
Finish the surface once set.
Subsequent processing
Protect fresh mortar surfaces from wind, direct sunlight, rain and/or frost for at least 3 days so that they do not dry too quickly.
Machine working
Please contact Remmers Technical Service (phone +49 5432 83900) before applying with machine processing.
-
-
Working tools / cleaning
-
Mixing tool, notched trowel, trowel, smoothing trowel, plasterer's float, sponge float
Clean tools with water while the material is still fresh.
-
-
Storage / shelf life
-
If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.
-
-
Usage
-
Approx. 1.75 kg/m²/mm layer thickness, or approx. 1.75 kg/dm³
-
-
General information
-
The substrate must have an average pull-off strength of at least 1.5 N/mm²
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
