Article No. 144601
Self-adhesive, vapour-tight bitumen sheeting
Downloads & documents
Product specifications
On delivery
Transverse 40%
Transverse 220 N/50 mm
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Separating layer on insulating materials
- Decoupling sheeting
- Vapour barrier
- Repairs and patching up
Properties
- Reliable fixing and prevention against slipping
- Self-adhesive, impermeable vapour barrier sheeting
- Impervious to radon, methane gas and vapour
- Self-sealing
- Integrated non-slip fleece surface
- With aluminium inlay
- Resistant to frost
-
Application
-
The sheets must be laid perpendicular to the roof pitch or slope. The side joints must have an overlap of at least 5 cm and the sheet ends an overlap of at least 15 cm. After installation, the sheets must be pressed down thoroughly and carefully over their entire surface, particularly at edges, corners, joints and connection points, as well as in the overlap areas. The bitumen sheets are not UV-resistant and must therefore not be exposed to direct sunlight for prolonged periods. The sheets must be protected within a few weeks of installation.
-
-
Storage / shelf life
-
If stored in closed containers in a cool, frost-free place protected from direct sunlight, the product will keep for approx. 12 months.
-
-
Disposal instructions
-
Larger product residues must be disposed of in the original packaging in accordance with the applicable regulations.
Must not be disposed of with household waste. Avoid product release, e.g. through dust, during use. Completely empty packaging must be recycled.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
