• Primer PUR
  • Primer PUR
    • Primer PUR
    • Primer PUR

    Article No. 753083

    Primer PUR

    Primer based on PUR solid resin and organic solvents

    Variant
    7530 | Primer PUR
    Size / Quantity

    Brochures

    product.brochures.loading

    Product specifications

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls indoors and outdoors
    • Primer for all PUR/MS sealants and grouting compounds

    Properties

    • Quick-drying
    • Optimum adhesion on many substrates
    • Preparation
      • Substrate requirements

        Joint sides must be clean, dry, free from grease and capable of bearing a load.

    • Application
      • Application temperature: min. 5 °C max. 40 °C
      • Brush
      • Apply the material using a suitable tool.

        Apply the next material within the specified flash-off time (Δ min./max.).

    • Application instructions
      • Low temperatures increase the setting time, while high temperatures decrease it.

        Do not use on PMMA (e.g. Plexiglas).

        When working on plastics, test first on an inconspicuous place.

        Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

    • Working tools / cleaning
      • Brush
      • Brush

      • Clean tools immediately after use with V 101 Thinner.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 6 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 6 months.

    • Usage
      • According to needs

      • Apply to a large enough trial area to determine the precise amount required.

    • General information
      • The applicable regulations and legal requirements must be observed.

        The relevant test certificates must be observed when planning and carrying out work.

        Always set up a trial area/trial areas first.

        Use only outdoors or in a well-ventilated area.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.