Article No. 080901
DS Protect 3L [basic]
3-layer drainage system made from recycled HDPE
Product specifications
On delivery
Base
Recycled HDPE (black) with geotextile and sliding layer
Surface weight
Approx. 865 g/m² as per EN ISO 9864
Temperature resistance
-30 °C to +80 °C
Thickness
Approx. 0.63 mm as per EN ISO 9863-1
Nub height
Approx. 9 mm
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Protective layer for waterproofing elements that come into contact with the ground in old and new buildings
- Protection layer according to DIN 18531, DIN 18533 and WTA Code of Practice 4-6
- Vertical drainage element in accordance with DIN 4095
Properties
- High compressive strength
- Very good at carrying away water
- Secure protection for settlement in excavation pits
- Filter-stable and clog-resistant
- Long-lasting durability
- Optimised for pressure-sensitive substrates
-
Storage / shelf life
-
May be stored for an unlimited period if protected from direct sunlight.
-
-
Usage
-
Approx. 1.1 m²/m²
-
-
General information
-
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
The relevant test certificates must be observed when planning and carrying out work.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-