Article No. 481001
Joint tape for interior and exterior corners based on flexible polyolefins for waterproofing movement joints
Downloads & documents
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Waterproofing of movement and construction joints in areas subjected to especially high stresses, e.g. building elements in the sewage treatment sector (special agreement required)
Properties
- Provides permanent waterproofing
- Resistant to diluted acids, alkaline solutions as well as to saline solutions
-
Preparation
-
Substrate requirements
Clean, dust-free and capable of supporting a load.
Even-surfaced, mineral substrate.
-
Preparations
Remove projecting seams and mortar remains.
Break off or chamfer corners and edges.
Remove gravel packets and fill cavities.
Detailed information can be found in the current Technical Data Sheet for the respective adhesive or embedded product.
-
-
Application
-
Apply adhesive or embedded material as specified in the current version of the respective data sheet.
Place the perforated edge on the first layer and then work in with a further layer of adhesive or embedded material.
The joint tape can be hot-welded with commercially available hot air
blowers (at least 2300 watt). When welding, use the lowest possible temperature and make sure that only the surface is slightly melted and the tightness of the product is not compromised. The area to be welded should also be roughened first.
-
-
Application instructions
-
The permissible application temperatures depend on the product properties of the waterproofing products used.
When using a filling knife to embed the joint tape, the filling knife should only be placed crosswise across the joint tape.
Make sure the joint tape is not cut by sharp edges.
-
-
Working tools / cleaning
-
For cutting: use scissors or a knife
For sealing: use a roller, wide brush or a filling knife -
Clean tools with water while the material is still fresh.
-
-
Storage / shelf life
-
If stored in a cool, dry place and protected against UV light, the product will keep for at least 12 months.
After the package has been opened, use within 2 months.
-
-
Usage
-
1 m/m
-
-
General information
-
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
-
-
Disposal instructions
-
The product must be disposed of in accordance with the official regulations.
-
