Article No. 493301
Earthing Kit
Downloads & documents
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- For the discharging of electrostatic charges in flooring.
- Kit for creating 10 connection points.
Properties
- Conduction kit consists of: 10 dowels S8 x 40 10 hexagon nuts M6 10 self-locking hexagon nuts M6 10 washers Ø 55 mm 10 washers Ø 30 mm 10 hexagon socket screws M6 10 cable lugs 20 self-adhesive copper strands 1 Allen key 1 SDS drill bit Ø 8 mm
-
Application instructions
-
Always observe the specific requirements of the floor covering and the technical requirements. The connection point must be in the immediate vicinity of the earthing connection and near to the wall. The position of the connection points must always be discussed in advance with a qualified electrician. At least two connection points must be created.
Surfaces separated by a joint must be earthed separately.
-
-
General information
-
For further information on using the Remmers Conduction Kit, please see the enclosed instructions for use.
-