• MultiBond Express

    Article No. 157115

    MultiBond Express

    Clear, universal, high-strength PUR adhesive

    Colour: clear | 1571
    Size / Quantity

    Product specifications

    On delivery

    Density (20°C) approx. 1.1 g/ml
    Water resistance (DIN EN 204) D4
    Open time approx. 5 min (+20 °C/65% RH)
    Pressing time min. 60 min (+20 °C/65% RH)
    Operating range -30 °C to +100 °C
    Adhesive shear strength (wood/wood) > 10 N/mm²

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors and outdoors
    • Interior and exterior use
    • Suitable for universal use
    • Wood, metal, ceramics, PVC, polystyrene and glass
    • Mounting furniture, panels, moulding and door linings
    • Gluing wooden windows and doors

    Properties

    • Solvent-free
    • Single-component
    • Solvent-free
    • High adhesive strength, no staining
    • Invisible bonds
    • Water-resistant according to DIN EN 204: D4
    • Does not run off, evens out surface irregularities
    • Preparation
      • Substrate requirements

        The substrate must be clean and capable of bearing a load.

      • Preparations

        Wallpaper, coatings and layers of paint are not suitable substrates and must be removed.

    • Application
      • Application temperature: min. 5 °C max. 35 °C
      • Gun for sealing compounds
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to max. +35 °C

      • Work using a sealant gun.

        Lightly wet both parts to be joined in order to achieve the maximum adhesive strength and rapid establishment of the bond.
        If joining two non-porous parts: lightly wet one side only.
        Apply the adhesive on one side and push together the pieces to be joined within 5 minutes, using a slight sliding or twisting movement if necessary and applying strong pressure. A higher adhesive strength is achieved by pressing the parts together (for at least 60 minutes). The adhesive bond must not be moved while it is hardening.

        The glue can be applied in dots or in a strip.

    • Working tools / cleaning
      • Gun for sealing compounds
      • Manual and compressed-air pistol

      • Clean with thinner and brush cleaner or V 101 Thinner while the material is still fresh. Later the product can be removed by mechanical means only.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Depending on the application / m²
      • Approx. 5 - 15 g/m² if applied in strips, approx. 50 g/m² if applied in dots

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.