Article No. 348583

    Induline V-Joint Protection

    Elastic moisture protection for frame connection joints on wooden windows and doors

    Colour: white | 3485
    Colour: white | 3485
    Please choose a colour
    Packaging unit

    Product specifications

    On delivery

    Binder Special acrylate polymers
    Density (20°C) Clear: approx. 1.04 g/cm³ White: approx. 1.14 g/cm³
    Odour Mild
    Degree of gloss Silk gloss
    Viscosity 5000 mPas

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • Dimensionally stable wood building elements: e.g. windows and doors
    • Helps protect against moisture in end-grain wood
    • Protects frame connection joints

    Properties

    • Easy to apply
    • Preserves the appearance of the V-joint
    • Dual-action moisture protection: sealing and penetration into the substrate
    • Compatible with all water-based Induline coating products
    • Preparation
      • Preparations

        Prime building elements and apply an intermediate coating by means of flow coating if necessary.

        Intermediate sanding: P 220 - 240, remove sanding dust.

    • Application
      • The nozzle tip may need to be cut at an angle in order to create an opening for properly measuring out the material. Position the tip on the open joint and apply with gentle pressure, leaving a slight excess. Smooth off the material with your finger (wear gloves). Once the material has dried, apply the next coating.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        If you intend to use this product in a different way in the coating process, please discuss this with the RTS (Remmers Technical Service) in advance.

        In order to ensure that all material can be emptied out of the container, it is recommended to stand it on its head during the application process (secure the tip with a lid).

      • Drying

        Ready for overcoating: after approx. 1 hour, depending on the application quantity

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures and high humidity delay drying.

    • Storage / shelf life
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.

    • Usage
      • Approx. 10 ml/running metre for a 2 mm V-joint

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.