• Care Set for Doors

    Article No. 274601

    Door Care Kit

    For painted and stained front doors

    2746 | Door Care Kit
    Size / Quantity



    Product specifications

    On delivery

    Binder Acrylate
    Density (20°C) Approx. 1.01 g/cm³ (Cleaner for Care Kits) Approx. 1.03 g/cm³ (Wood Balm for Doors)
    Odour Characteristic (Cleaner for Care Kits) Mild (Wood Balm for Doors)

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors and outdoors
    • for exterior doors
    • Maintenance of painted and stained wooden front doors
    • Maintenance of components that have been treated with Induline NW-740/05 (natural effect varnish)


    • Regular use increases the time between maintenance intervals and extends the lifespan of the surfaces
    • Additional protection against the effects of weathering
    • Easy to use on large surface areas
    • Slight change in the gloss level of the treated surface
    • Application
      • Temperature of the material, air and substrate: from min. +15 °C to max. +30 °C
      • Shake before use
      • Application requirements

        Temperature of the material, air and substrate: from min. +15 °C to max. +25 °C.

      • Shake well before use.

        Soak a cotton cloth with the cleaner and clean the surface; do not rub painted surfaces too intensively.

        Leave to dry for approx. 30 minutes.

        Using the second special cloth, apply a thin(!) layer of balm quickly, evenly and in one direction (left to right or top to bottom).

        Do not buff or rub.

    • Application instructions
      • Drying time: can be worked over after 30 minutes
      • Protect freshly treated surfaces from driving rain, wind, sunlight and condensation.

        Do not use on areas directly exposed to sunlight or on heated surfaces.

        Do not use at temperatures below 15 °C.

        Please only use the special cloths enclosed.

        Any material that is not made of wood (e.g. covers, glass, door handles) must not come into contact with the cleaning product. If contact does occur, the material should be rinsed carefully with water.

      • Drying

        Approx. 30 minutes

        Practice values at +20 °C and 65% relative humidity.

        The coating may take significantly longer to dry thoroughly in lower temperatures, at high humidity or if the maximum layer thickness has been exceeded.

      • Thinning

        Ready to use

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.

    • Usage
      • Approx. 5 ml - 10 ml / m² per layer applied
      • 5-10 ml/m² per coat

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.