Article No. 129583

    ACC H

    Accelerator for epoxy resins

    Variant
    1295 | ACC H
    Size / Quantity

    Brochures

    product.brochures.loading

    Product specifications

    On delivery

    1C on delivery

    Density (20°C) 0.97 g/cm³

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    Properties

    • Easy dosing
    • Solvent-free
    • Accelerates full hardening
    • Application
      • Application requirements

        Temperature of the material, air and substrate: from min. +8 °C to max. +25 °C

      • As a general principle, higher temperatures will reduce and lower temperatures will increase the times stated.

    • Storage / shelf life
      • Store frost-free
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Up to 4% by mass based on the binder

    • Application examples
      • Epoxy ST 100

        Development of Shore D hardness at room temperature (approx. 22 °C)
        depending on quantity of ACC H added


        without ACC H+ 2% by mass ACC H+ 4% by mass ACC H
        4 hours01660
        6 hours124171
        8 hours155575


        Epoxy OS Color New

        Development of Shore D hardness at room temperature (approx. 22 °C)
        depending on quantity of ACC H added


        without ACC H+ 2% by mass ACC H+ 4% by mass ACC H 
        4 hours01762
        6 hours85076
        8 hours196379

    • General information
      • Unless otherwise specified, all of the values and application rates given above have been determined under laboratory conditions (20 °C). Slight deviations from these values may arise if the product is worked with on site.

        Use of the accelerator results in a shorter processing time. Depending on the quantity used, there may be problems with adhesion, trowel marks or spiked roller marks on the surface.

        Properties such as impact resistance, crack bridging, UV stability and early water resistance are negatively affected.

        When applying to continuous surfaces, the material should always have the same quantity of accelerator to ensure uniform colour.

        Not for use to accelerate other epoxy resin systems since system incompatibilities cannot be ruled out.

        Further notes on working, system construction and maintenance of the listed products can be found in the latest Technical Data Sheets and the Remmers system recommendations.

    • Safety / regulations
      • For professional users only!

        Further information concerning safety during transport, storage and handling as well as on disposal and ecology can be found in the latest Safety Data Sheet.