• Epoxy Wood Strengthener

    Article No. 316101

    Epoxy Wood Strengthener

    2K solvent-free wood strengthener on an epoxy resin base

    Colour: clear | 3161
    Size / Quantity

    Product specifications

    On delivery

    Density (20°C) Approx. 1.07 g/cm³
    Odour Characteristic
    Viscosity (20 °C) Approx. 100 mPas

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors
    • For professional users only
    • Interior wood
    • Only on small sections of exterior wood
    • Strengthening wood components that have been weakened by fungal and insect attack
    • Preservation of historic wood elements (e.g. framework, antiquities)
    • Adhesion promoter for epoxy wood substitute compounds


    • Strengthener that blocks water vapour
    • High penetration capacity thanks to low viscosity
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

      • Preparations

        Remove decomposed wood and loose wood fibres with a steel brush.

        If necessary, treat the wood components with IG-10 Impregnation Primer IT for preventive protection against wood-destroying insects and fungi.

    • Application
      • Application temperature: min. 10 °C max. 25 °C
      • Brush
      • Application requirements

        Temperature of the material, air and substrate: from min. +10 °C to max. +25°C

      • Immediately after mixing, apply the material promptly to the surface with a brush.

        Repeat process while the material is still wet if necessary.

        Do not pour the material or apply it as a filler.

    • Application instructions
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        Ensure good ventilation.

    • Working tools / cleaning
      • Brush
      • Brush

      • Clean tools immediately after use with V 101 Thinner.

        The material can no longer be cleaned off once it has dried or hardened.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 250 - 500 g/m² depending on the substrate

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.