Article No. 315401

    Tannin Stain Remover

    Bleaching agent for iron discolouration and tannins

    3154 | Tannin Stain Remover
    Size / Quantity

    Product specifications

    On delivery

    Density Approx. 1.015 g/cm³
    Odour Odourless

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors and outdoors
    • For professional users only
    • Wood and wood-based materials
    • Especially suitable for oak, Douglas fir, larch, chestnut, western red cedar, etc.
    • Mineral substrates


    • Water-based
    • Brightening effect
    • Eliminates iron discolouration
    • Ready to use
    • Preparation
      • Preparations

        Fully remove any existing old coatings.

    • Application
      • Application temperature: min. 5 °C max. 30 °C
      • Brush
      • Brush generously onto the discoloured area.

        Repeat the process if necessary.

        Wash off residue thoroughly with water.

        Once fully dry, the wood can be treated with stains or paints.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 2.5-4 h
      • When using on mineral substrates (plaster, masonry, concrete, etc.), set up a trial area beforehand to check the compatibility.

        Soft jointing mortar can cause white efflorescence.

        Components should be treated as thoroughly as possible.

      • Drying

        Overcoating: after approx. 2.5 - 4 hours

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

      • Thinning

        Ready to use

    • Working tools / cleaning
      • Brush
      • Brush

      • Clean tools immediately after use with water.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 100 ml - 200 ml / m² per layer applied
      • 100 - 200 ml/m² depending on the discolouration intensity

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.