Article No. 382601
Solvent-based, universal pigment stain
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Coloured decoration of wood surfaces in interior finishing
- Adding colour to solvent-based varnishes
Properties
- Highly concentrated combination of pigments
- Stain emphasises the pores (e.g. rustic effect on oak and ash)
- Pure – for very intensive wood colouration
- Virtually any wood colour and intensity can be achieved through dilution and mixing
-
Preparation
-
Substrate requirements
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
Wood moisture content: 8-12%
-
Preparations
Wash off greasy or resin-rich woods/substrates with WV-891 or V-890. Use UN-894 indoors on the construction site. Ensure good ventilation for solvents.
Sand using a sandpaper grit of P150-180.
Apply the stain immediately after sanding.
-
-
Application
-
Application requirements
Temperature of the material, air and substrate: from min. +18°C to max. +25°C.
-
Stir well, including during application or after a break in work.
Apply by brushing or spraying.
Flow cup gun: nozzle size: 1.0 - 1.6 mm, atomiser air pressure: 1.0 - 2.0 bar.
Immediately after application, remove excess material with a lint-free cotton cloth.
Seal opened containers well and use contents as soon as possible.
-
-
Application instructions
-
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
-
Drying
Can be overcoated: after approx. 1 - 2 hours
Practice values at +20 °C and 65% relative humidity.
Low temperatures, poor ventilation and high humidity delay drying.
-
Thinning
With NC HB-005 colourless, V-890 or V-893
-
-
Working tools / cleaning
-
Brush, flow cup gun, lint-free cotton cloth
-
Clean tools using WV-891 Brush Wash or V-890 Thinner.
Ensure that any residue from cleaning is disposed of correctly.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
60 - 120 ml/m²
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
