Article No. 28110405
Clear 1K topcoat, extremely fast drying
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Interior wood
- Primer & top coat
- Solid wood & veneers
- Furniture and interior finishing work
- Chair and frame construction
- Interior finishing work: e.g. panels, borders, cladding & interior doors
Properties
- Single-component: simple and economical handling
- Good flow properties
- Quick-drying
- Good sanding properties
- Highly transparent, good emphasis of the wood grain
- Short time until ready for stacking
- Resistant to chemicals: DIN 68861, 1C
-
Preparation
-
Substrate requirements
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
Wood moisture content: 8-12%
-
Preparations
Wash off greasy or resin-rich woods/substrates with WV-891 or V-890. Use UN-894 indoors on the construction site. Ensure good ventilation for solvents.
Sand wood using P 100 - 180 grit.
If tinting is required, treat the substrate with a suitable stain.
-
-
Application
-
Stir well.
Spray or pour.
Flow cup gun: nozzle size: 2.0 - 2.5 mm; atomiser air pressure: 2.0 - 3.0 bar.
Airless spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 120 bar.
Airmix spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 100 bar, atomiser air pressure: 1.2 - 2 bar.
After drying and intermediate sanding (P 240 - 320), apply a second coat of the product.
Seal opened containers well and use contents as soon as possible.
-
-
Application instructions
-
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
Before coating technically modified woods and wood-based materials, apply the product to a trial surface and conduct a suitability test on the desired area of use.
If using as a transparent topcoat on surfaces with a colour varnish (improved resistance to metal rings and durability), one coat is sufficient. When applying over a colour varnish, it is recommended to add 5-10% of the Aqua colour varnish to the clear varnish in order to counteract colour changes.
-
Drying
Dust-dry: after approx. 45 minutes
Touch-dry: after approx. 60 minutes
Ready for overcoating: after approx. 1.5 hours
Coated products can be stacked: after 24 hoursPractice values at +20 °C and 65% relative humidity.
Low temperatures, poor ventilation and high humidity delay drying.
-
Thinning
Ready to use; dilute with max. 20% water if necessary (flow cup gun).
-
-
Working tools / cleaning
-
Airless/airmix spraying equipment, flow cup gun, pouring equipment
-
Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.
Ensure that any residue from cleaning is disposed of correctly.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
80 - 120 ml/m² per coat
-
-
General information
-
To preserve the quality of the surface, we recommend regular cleaning and care using a lint-free cotton cloth. Please use solvent-free and silicone-free cleaning agents.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-