Aqua BNG-405 Brilliant Primer

Wood moisture content: 8-12%

The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

Coating should be carried out immediately after sanding the bare wood.

Wash off greasy or resin-rich woods/substrates with WV-891 or V-890. Use UN-894 indoors on the construction site. Ensure good ventilation for solvents.

Softwoods: sand with P 80 - 120.

All other substrates: sand with P 180 - 320.

If colouring is desired, stain the substrate using Aqua KB-004, Aqua BB-007 or Aqua PB-006.

Remove resin galls.

Flow cup gun: nozzle size: 2.0 - 2.5 mm; atomiser air pressure: 2.0 - 3.0 bar.

Airmix spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 100 bar, atomiser air pressure: 1.2 - 2 bar.

Airless spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 120 bar.

Spray.

After drying and intermediate sanding if necessary (P 240 - 320), apply a second coat.

Seal opened containers well and use contents as soon as possible.

Check colour, adhesion and compatibility with the substrate by setting up a trial area.

Before coating technically modified woods and wood-based materials, apply the product to a trial surface and conduct a suitability test on the desired area of use.

Prior to full application, please apply a test coat to a sample area under practical conditions using the desired system, then test or examine the surface properties.

Dust-dry: after approx. 15 minutes
Overcoating: after approx. 1 - 2.5 hours

Low temperatures, poor ventilation and high humidity delay drying.

Practice values at +20 °C and 65% relative humidity.

Ready to use, dilute with max. 20% water if necessary (flow cup gun)

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

80 - 120 ml/m² per coat

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.