Induline Fast Filler

Temperature of material, surroundings and substrate: ≥ + 5 °C

Clean voids and fill in the product with light pressure with a Japan spatula.

Refill larger voids after a drying time of approx. 3 hours.

Maximum layer thickness is 3 mm per application.

To be used outdoors only with the correspondent resistant coating.

Test unknown coating systems for incompatibility.

Not suitable for areas which are prone to corrosion.

Drying time: approx. 30 minutes
Can be sanded/coated: after approx. 3 hours

Low temperatures, poor ventilation and high humidity delay drying.

Japan spatula made of hard plastic or stainless steel

GR_J1_1

Cleaning with water directly after use or with Aqua RK-898-Cleaning Concentrate for persistent contamination.

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

As required

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.