Article No. 317603
Acrylic stain, water-based for interior and exterior use
Downloads & documents
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Building elements with no or limited dimensional stability
- Interior and exterior use
- Clear version: for use on interior wood and sheltered exterior wood
Properties
- Water-based
- Permanently elastic
- Does not flake
- Weather-resistant and UV-resistant
- Repels water
- Non-drip, suitable for overhead work
-
Preparation
-
Substrate requirements
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
Wood building elements with limited or no dimensional stability: wood moisture content max. 18%
-
Preparations
Exterior wood that needs to be protected against soft rot and blue stain must be pre-treated with a suitable wood preservative* - not necessary for interior wood (*Use biocides safely. Always read the label and product information before use).
Sand grey and weathered wood surfaces down to sound, bright wood.
Thoroughly remove any dirt, grease and non-adhering old coatings.
Smooth, planed wood surfaces should be sanded and dusted before the coating is applied to ensure better absorption.
-
-
Application
-
Stir well and apply quickly using a brush.
Apply a second coat once the first has dried.
-
Application instructions
-
Not suitable for coating flooring (terraces, wooden decking, etc.)
Substances in oak may bleed, causing dark discolouration, when coated with water dilutable dispersion stains.
Check colour and compatibility with the substrate by applying a trial coat.
Before coating technically modified woods and wood-based materials, apply the product to a trial surface and conduct a suitability test on the desired area of use.
-
Drying
Practice values at +20 °C and 65% relative humidity.
Dust-dry: after approx. 30 minutes
Touch-proof: after approx. 60 minutes
Ready for overcoating: after approx. 4 hours
Curing time approx. 2-3 weeks, depending on temperature.
Low temperatures, poor ventilation and high humidity delay drying.
-
Working tools / cleaning
-
Paintbrush with acrylic bristles, flat brush
Clean tools immediately after use with water and detergent.
Ensure that any residue from cleaning is disposed of correctly.
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.
-
Usage
-
Approx. 80 ml/m² per coat, undiluted
-
General information
-
DIN EN 71-3 "Migration of certain elements":
This product complies with the limits for the migration of heavy metals to children's toys according to DIN EN 71-3 and thus fulfils one of several further requirements for the safety of children's toys according to the EU "Toy Directive" (2009/48/EC).
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-