Carbolin

Wood building elements with limited or no dimensional stability: wood moisture content max. 18%

Thoroughly remove any dirt, grease and non-adhering old coatings.

Temperature of the material, air and substrate: from min. +5 °C to max. +25 °C

Stir well before using.

Apply material evenly with a brush or by spraying.

After drying, apply a second coat if required.

Seal opened containers well and use contents as soon as possible.

If necessary, impregnate woods that are susceptible to fungi with Remmers Wood Preservative Primer*. (*Use biocidal products carefully. Always read the label and product information before use.)

Before coating technically modified woods and wood-based materials, apply the product to a trial surface and conduct a suitability test on the desired area of use.

Approx. 4 hours at 20 °C and 65% relative humidity.

Low temperatures, poor ventilation and high humidity delay drying.

Ready to use

Brush, roller

Clean tools, equipment and any splashed material immediately with water while still fresh.

Ensure that any residue from cleaning is disposed of correctly.

At least 36 months in unopened, original containers stored cool, dry and protected from frost.

Approx. 100 ml/m² per coat

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.