• Induline OW-811

    Article No. 343105

    Induline OW-811

    Water-based, sprayable intermediate and finishing coat with oil effect for dimensionally stable wood/aluminium building elements

    Colour: special colours | 3431
    Colour: special colours | 3431
    Please choose a colour
    Size / Quantity

    Product specifications

    On delivery

    Binder Acrylate resin
    Density (20°C) Approx. 1.03 g/cm³
    Odour Characteristic
    Degree of gloss Cloth matt
    Viscosity 2400 - 2800 mPas

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • for dimensionally stable elements
    • For professional users only
    • Soft and hard woods
    • Dimensionally stable wood/aluminium building elements: e.g. wood/aluminium windows and doors
    • Protected constructions without direct outdoor exposure
    • Intermediate and finishing coats

    Properties

    • Water-based
    • Natural, matt surface produces an oiled effect
    • Pleasant feel
    • Quick drying
    • Free from film-preserving and wood-preserving biocides
    • No tendency to self-ignite as can occur in products that dry via oxidation
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Dimensionally stable wood building elements: wood moisture content 11-15%

      • Preparations

        If necessary, impregnate non-resistant woods with a wood preservative* (*Use biocides safely. Always read the label and product information before use).

        If necessary, protect parapet joints with Induline V-Joint Protection or Induline AF-920.

        Prime wood surfaces and carry out light intermediate sanding if necessary.

    • Application
      • Temperature of the material, air and substrate: from min. +15 °C to max. +30 °C
      • Stir before use
      • Airless/airmix spraying / Flow cup gun
      • Stir well before using.

        The values given are based on undiluted material. The best spraying pattern is achieved if the material has a temperature of 15-20 °C.

        Flow cup gun: nozzle size: 1.8-2.0 mm, atomiser air pressure 2.5-3.5 bar.

        Airless spraying: nozzle size: 0.28-0.33 mm; material pressure: 90-120 bar.

        Air-mix spraying: nozzle size: 0.28-0.33 mm; material pressure: 70-90 bar, atomiser air pressure 1-2 bar.

        A repeat application may be required in exceptional cases.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 4 h
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        Ensure good ventilation.

        Do not use in direct sunlight or at temperatures below +15 °C or above +30 °C.

        Substances in oak may bleed, causing dark discolouration, when coated with water dilutable dispersion stains.

        To prevent any substances in the wood from becoming active, forced drying should be carried out.

        Observe current standards and guidelines for coating wood building elements outdoors (Codes of Practice issued by the German Association of Window and Facade Manufacturers (VFF), Code of Practice No. 18 issued by the German Federal Committee for Paint and the Protection of Material Assets (BFS), guidelines issued by the German Lacquer and Printing Ink Association (VdL) and ift guidelines issued by the Institut für Fenstertechnik).

        The system finder on our website www.remmers.com contains coating recommendations for specific wood types to be used when treating windows and exterior doors.

      • Drying

        Low temperatures, poor ventilation and high humidity delay drying.

      • Thinning

        Dilute with max. 5% water if needed.

    • Working tools / cleaning
      • Airless/airmix spraying / Flow cup gun
      • Hand spray gun, automatic spraying equipment

      • Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 125 ml - 175 ml / m² per layer applied
      • 125 - 175 ml/m² per coat
        (corresponds to a dry film thickness of approx. 35 - 50 µm)
        The stated values refer to undiluted material.

    • General information
      • Sealing:

        Sealing compounds must be compatible with the coating and may only be applied once the coating has dried thoroughly.

        Only use sealing profiles that are free of plasticisers.

        Care and maintenance:

        This product can be used with Induline Perfect Finish to obtain a varnish in brushing consistency for restoring and patching up.

        Observe current standards and guidelines for coating wood building elements outdoors (Codes of Practice issued by the German Association of Window and Facade Manufacturers (VFF), Code of Practice No. 18 issued by the German Federal Committee for Paint and the Protection of Material Assets (BFS), guidelines issued by the German Lacquer and Printing Ink Association (VdL) and ift guidelines issued by the Institut für Fenstertechnik).

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.