• DS Protect [basic]

    Article No. 081501

    DS Protect [basic]

    3-layer protective system made of recycled PET


    Product variants
    Variant table
    Variant
    0815 | DS Protect
    Size / Quantity
    1.25 m x 14 m = 17.5 m²

    Downloads & documents

    Technical Data Sheet
    Declaration of performance
    ➥Show all documents (in different languages) for download / dispatch

    Brochures

    product.brochures.loading

    Product specifications

    On delivery

    Compressive strength 350 kN/m²
    Temperature resistance -20 °C to +60 °C
    Nub height Approx. 7.5 mm
    Aperture width O90 110 µm

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Product details Application Usage / application examples Notes

    Field of application

    • For use outdoors
    • Protective layer for waterproofing elements that come into contact with the ground in old and new buildings
    • Protective layer in accordance with DIN 18533
    • Protective layer in accordance with WTA Code of Practice 4 - 6
    • Vertical drainage element in accordance with DIN 4095

    Properties

    • Recycled PET
    • Very good at carrying away water
    • Storage / shelf life
      • Unlimited shelf-life

      • May be stored for an unlimited period if protected from direct sunlight.

    • Usage
      • Total application rate approx. 1.1 m² / m²

      • Approx. 1.1 m²/m²

    • General information

      • Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions

      • The product must be disposed of in accordance with the official regulations.

    Systemproducts

    DS Protect AL
    DS Protect AL

    Article No. 0819
    DS Protect Clip [basic]

    Article No. 0816