Article No. 435001
Special flange + adhesive for waterproofing pipe lead-throughs
Downloads & documents
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Waterproofing pipe lead-throughs in conjunction with Remmers PMBC and MB 2K
- Water impact classes W1.1-E, W1.2-E, W2.1-E, W3-E and W4-E according to DIN 18533
- Retrofit waterproofing of buildings according to WTA Code of Practice 4-6
Properties
- Water pressure tight
- UV and temperature resistant
- Resistant to salt water
- Free from isocyanate, silicone and halogens
- Solvent-free
-
Preparation
-
Substrate requirements
Even-surfaced, mineral substrate.
Clean, dust-free and capable of supporting a load.
-
Preparations
Remove projecting seams and mortar remains.
-
-
Application
-
Application requirements
Temperature of the material, air and substrate: from min. +5 °C to +35 °C
-
See instructions for use.
-
-
Working tools / cleaning
-
Sealant gun (4701, 4702), sandpaper
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
According to needs
-
-
General information
-
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
The relevant test certificates must be observed when planning and carrying out work.
-
-
Disposal instructions
-
The product must be disposed of in accordance with the official regulations.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
