Article No. 286401
Pigment for tinting MB FL 2K
Downloads & documents
Product specifications
On delivery
Art. 2864 white = approx. 1.80 g/cm³
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Tinting grout made from MB FL 2K
Properties
- Very high pigment content
- Good flow properties
- Free from additives containing alkylphenols (APEO)
-
Application
-
Add the required quantity of pigment to the liquid component and mix using a suitable mixing tool.
Loosen the powder component and add it in full to the liquid component.
Mix for approx. 1 minute before suspending the mixing process to allow the air that has been stirred in to escape.
Remove the powder adhering to the side.
Mix again for approx. 2 minutes.
Keep the mixing tool near the bottom of the bucket while mixing.
-
-
Storage / shelf life
-
At least 36 months in unopened, original containers stored cool, dry and protected from frost.
-
-
Usage
-
Depending on requirements and desired colour (max. 1.2% of total mass)
Colour variants:
Light grey: add 60 ml Pigment FL white per 10 kg MB FL 2K
Stone grey: add 20 ml Pigment FL black per 10 kg MB FL 2K
Anthracite: add 40 ml Pigment FL black per 10 kg MB FL 2K
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
