Article No. 054335
Basic mixture (dry-slaked, cement-free sand/lime mortar) for producing mortars and renders to a historical formulation with the addition of local aggregates
Product specifications
On delivery
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Render mortar
- Repair and restoration of historical substrates
- Jointing mortar
Properties
- Free from cement, trass, hydraulic limes and other “non-historic” binders
- Forms characteristic small lumps of lime when dry-slaking burnt lime
- The small lumps of lime have a “self-healing” effect on cracks and lateral detachment
- Base mixture with a high binder content for producing mortars and renders to a historical formulation with the addition of local aggregates.
-
Preparation
-
Substrate requirements
The substrate must be clean and capable of bearing a load.
-
-
Working tools / cleaning
-
Mixing tool, trowel, smoothing board, notched plasterer's float, render comb, broom, nail board, sponge float, grated scraper, wooden shovel
Clean tools with water while the material is still fresh.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
Dependent on application
-
-
General information
-
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
The relevant test certificates must be observed when planning and carrying out work.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
