PU Wood Substitute Compound

The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

Permitted wood moisture content: u < 18%

Create a stable mould (e.g. laminated board) in the original dimensions of the wood building element and line with release paper.

For larger batches (> 3 kg), the mould must also be secured with screw clamps. Do not exceed the maximum batch size of 7.5 kg (risk of bursting).

Pour the compound into the void, compact with a trowel, cover with release paper and seal tightly.

Remove the mould after 24 hours.

Reconstructed areas can be sanded and provided with decorative coatings after 7 days.

During application, do not allow any additional moisture to enter the reaction process.

Protect the product from moisture.

Overcoating: after 7 days

Trowel

Clean tools immediately after use with V 101 Thinner.
Dispose of the remains from cleaning properly.

The material can no longer be cleaned off once it has dried or hardened.

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 6 months.

Per 1 litre volume for reconstruction: 0.5 kg PU wood substitute compound and 0.25 kg wood shavings

If the safety of load-bearing and bracing wooden components is compromised, a structural engineer must be consulted. To help the structural engineer on site, a statics model has been developed to aid with dimensioning (rod dowels, flat steel thickness) during renovation.

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.