The mould remediation panels from Remmers are made of cellulose-reinforced calcium silicate. They are diffusionopen, thermally insulating and extremely absorbent. Any condensation is absorbed and released back into the room air over a large area during periods of evaporation. The surface remains permanently dry, giving mould spores no opportunity to grow. The high pH value of approx. 10.5 (alkaline) further impedes mould growth.
Calcium silicate renovation panels are suitable for the permanent elimination of condensation on the inside of exterior walls and its associated phenomena such as musty odour, disintegration of interior plaster, peeling of wallpaper and coatings, as well as mould growth and the health problems often associated with it. If there are other causes of moisture besides condensation, these must be determined by a specialist. Structural building defects, such as defective horizontal and/or vertical seals, or facades that are not impervious to driving rain, must always be eliminated.
Benefits at a glance:
- High sorptive water uptake
- Fast moisture distribution
- Improves the indoor climate
- Thermally insulating
- Naturally alkaline material, harmless to health
- Low-allergy
- Non-flammable, fire class A1
- Not ignitable, does not contribute to fire load
- Available in 25, 30 and 50mm
- Panel technology for quick and easy installation
SLP CS 25 / 30 / 50
Application:
- Mould remediation and prevention in existing buildings
- Establishment of the minimum hygienic thermal protection standard for existing building substance
- Improved indoor climate thanks to increased wall surface temperature
- Improved energy standards
Property profile:
- Thermal insulation and mould inhibition
- Water vapour diffusion open
- Capillary-active
- No quartz sand or powdered quartz
- Thermal conductivity λ approx. 0.07 W/(m•K)
- Building material class A1 (non-flammable)
- Low construction height