• Pipe flange

    Article No. 435101

    Pipe flange

    Special flange + adhesive for waterproofing pipe lead-throughs

    Product specifications

    On delivery

    Colour black
    Form half-shells made of polypropylene (PP)
    Odour neutral odour
    Skin formation after approx. 25 min
    Temperature resistance after curing -40 °C to +90 °C

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use outdoors
    • Waterproofing pipe lead-throughs in conjunction with Remmers PMBC and MB 2K
    • Water effect classes W1.1-E, W1.2-E, W2.1-E, W3-E and W4-E according to DIN 18533
    • Retrofit waterproofing of buildings according to WTA Code of Practice 4-6

    Properties

    • Water pressure tight
    • UV and temperature resistant
    • Resistant to salt water
    • Free from isocyanate, silicone and halogens
    • Solvent-free
    • Preparation
      • Substrate requirements

        Even-surfaced, mineral substrate.

        Clean, dust-free and capable of supporting a load.

      • Preparations

        Remove projecting seams and mortar remains.

    • Application
      • Gun for sealing compounds
      • Application temperature: min. 5 °C max. 35 °C
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to +35 °C

      • See instructions for use.

    • Working tools / cleaning
      • Gun for sealing compounds
      • Sealant gun (4701, 4702), sandpaper

    • Storage / shelf life
      • Shelf-life 12 months
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • According to needs

    • General information
      • Deviations from applicable regulations must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • The product must be disposed of in accordance with the official regulations.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Systemproducts