Concrete remover

Apply the material using suitable equipment.

Remove residue with a stiff brush or a filling knife.

Treat thick layers multiple times wet-on-wet.

Rinse cleaned surfaces with clear water.

Do not allow the substrate to dry out.

Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

Set up the necessary collection receptacles.

Clean tools with water while the material is still fresh.

At least 36 months in unopened, original containers stored cool, dry and protected from frost.

Apply to a large enough trial area to determine the precise amount required.

Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

The relevant test certificates must be observed when planning and carrying out work.

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.