Article No. 264003

    Wood Cleaner

    Special cleaner for weathered outdoor wooden decking with decorative coatings

    Variant
    2640 | Wood Cleaner
    Size / Quantity

    Product specifications

    On delivery

    Density (20°C) approx. 0.98 g/cm³
    Flash point >60°C
    Odour mild
    Viscosity gel form

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls indoors
    • Wooden decking
    • Removal of coating residues (oils and low-build stains)

    Properties

    • Water-based
    • Effective removal of residual oils and low-build stains from wooden decking
    • No more pre-sanding of surfaces required
    • Water-based
    • Special brushes can be screwed on to a standard telescopic handle using a screw thread
    • Application
      • Temperature of the material, air and substrate: from min. +15 °C to max. +25 °C
      • Brush
      • Scrubber
      • Application requirements

        Temperature of the material, air and substrate: from min. +15 °C to max. +25 °C.

      • Use the special scrubbing brush, a surface brush or paintbrush to apply a generous, even layer of material to the entire area.

        Leave the material to take effect for approx. 30 minutes.

        Spray lightly with water using a surface sprayer (4040 or 4041) to activate the cleaning agent.

        Scrub down the wood in the direction of the grain/board by board using the special scrubbing brush.

        Brush any recesses using the special brush for decking grooves.

        Re-spray and re-brush as required.

        If necessary, particularly stubborn coating residues can be removed using a metallic scraper when wet.

        Hose down the wood thoroughly.

        Keep rinsing until no more foam forms. It may help to use a coarse broom to sweep away residual water.

        Assess the cleaned surface once it has dried and repeat the cleaning process if needed.

        Where necessary, we recommend using Wood Revitalizer.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Always set up a trial area/trial areas first.

        Keep the treated area damp during this time.

        Rinse treated areas with plenty of water.

        Do not let any rinsing water get into bodies of water.

        If necessary, use tarpaulins or sheeting to protect against the product coming into direct contact with any adjacent crops, plants or building elements.

        After leaving to dry for 1-2 days, re-treat using garden wood oils, maintenance oils or WPC impregnating oils.

    • Working tools / cleaning
      • Brush
      • Scrubber
      • Special scrubbing brush, paintbrush with acrylic bristles, flat brush

      • Clean tools immediately after use with water and detergent.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

        Use the contents of open containers as quickly as possible.

    • Usage
      • Total application/absorption rate 200 ml Total / m²
      • Approx. 200 ml/m² in a single coat

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.