• Induline GW-202-WF

    Article No. 248063

    Induline GW-202-WF

    Water-based, white primer for wood building elements with limited or no dimensional stability

    Colour: white | 2480
    Colour: white | 2480
    Please choose a colour
    Size / Quantity

    Product specifications

    On delivery

    Density (20°C) Approx. 1.30 g/cm³
    Odour Characteristic
    Runout time s (20° C, DIN 4) 20 - 30

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors and outdoors
    • for elements with limited dimensional stability
    • for not dimensionally stable elements
    • For professional users only
    • For use on interior and exterior wood
    • Softwoods
    • Building elements with no or limited dimensional stability
    • Industrial series production (vacuum procedure)

    Properties

    • Water-based
    • Quick-drying
    • Good block resistance
    • Good hiding power
    • Water-based: does not give off any unpleasant odours and tools can be cleaned with water
    • Free from film preservation and wood protection biocides
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Wood building elements with limited or no dimensional stability: wood moisture content max. 18%

      • Preparations

        If necessary, impregnate non-resistant woods with a wood preservative* (*Use biocides safely. Always read the label and product information before use).

        Observe BFS Code of Practice No. 18 "Coatings on Wood and Wooden Working Materials in Outdoor Areas".

    • Application
      • Temperature of the material, air and substrate: from min. +15 °C to max. +30 °C
      • Stir before use
      • Application requirements

        Temperature of the material, air and substrate: from min. +15 °C to max. +30 °C.

      • Stir well, including during application or after a break in work.

        After drying, apply an intermediate coat of this product or a suitable finishing coat.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 1 h
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        Ensure good ventilation.

        Before coating technically modified woods and wood-based materials, apply the coating to a trial surface and conduct a suitability test on the desired area of use.

        With water based coating systems, there is always a residual risk that substances contained in the wood will cause discoloration.

      • Drying

        Ready for overcoating: after approx. 1 hour

        If forced drying is used, ready for overcoating: depending on the system after approx. 30 minutes / the workpiece must be cooled to < 25°C prior to packing.

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

      • Thinning

        Ready to use, dilute with water if necessary

    • Working tools / cleaning
      • VACUMAT®, acrylic brush, spraying equipment

      • Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 80 ml - 120 ml / m² per layer applied
      • 80 - 120 ml/m² per coat

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Systemproducts