Article No. 328463

    Induline SW-960

    Water-based concentrate for coating formwork supports


    Product variants
    Variant table
    Colour: Induline SW-960 | 3284
    Size / Quantity
    500 kg

    Downloads & documents

    Technical Data Sheet
    ➥Show all documents (in different languages) for download / dispatch

    Brochures

    product.brochures.loading

    Product specifications

    On delivery

    Binder Acrylate
    Density (20°C) Approx. 1.05 g/cm³
    Odour Characteristic
    Runout time s (20° C, DIN 4) Approx. 12

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Product details Application Usage / application examples Notes

    Field of application

    • For use indoors and outdoors
    • For professional users only
    • For use on interior and exterior wood
    • Coating of formwork beans made of wood and wood-based materials
    • Edge coating for wood-based materials (e.g. formwork panels)

    Properties

    • Water-based
    • Concentrate
    • Can be stacked wet-on-wet
    • Alkali-resistant
    • Repels water
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Wood moisture content max. 15%

    • Application
      • Application temperature: min. 10 °C max. 30 °C
      • Stir before use
      • Automatic vacuum impregnation
      • Board coating machine/ brushing machine

      • Stir well, including during application or after a break in work.

        Industrial series production (VACUMAT®, board coating machine)

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 1 h

      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        In case of foam formation in the (edge) VACUMAT® , an addition of 0.05 - 0.30 % defoamer VP 20509 is recommended.

      • Drying

        Ready for overcoating: after approx. 1 hour

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

    • Working tools / cleaning
      • Automatic vacuum impregnation
      • Board coating machine/ brushing machine

      • VACUMAT® vacuum coating system, board coating machine

      • Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months

      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 50 ml – 80 ml/m² per layer applied

      • 50 - 80 ml/m² depending on the absorbency of the subtrate (ready-to-use solution)

    • Disposal instructions

      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations

      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Systemproducts