• PUR PF-232 Pigment Filler

    Article No. 513205

    PUR PF-232 Pigment Filler

    Highly pigmented 2K spray filler with excellent sanding properties

    Colour: white | 5132
    Size / Quantity

    Brochures

    product.brochures.loading

    Product specifications

    On delivery

    Binder Acrylate
    Density (20°C) Approx. 1.23 g/cm²
    Odour Characteristic
    Runout time s in DIN 4 cup Approx. 45

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors
    • for furniture
    • For professional users only
    • Preparing opaque, pigmented varnishes
    • High-quality furniture
    • Solid wood and wood-based materials

    Properties

    • Solvent-based
    • UV-resistant
    • High filling power
    • Good flow properties
    • Quick-drying and easy to sand
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Wood moisture content: 8-12%

      • Preparations

        Sand surface with P 150 - 180.

        The coating should be applied directly after sanding.

        Resin galls must be removed or stripped to a suitable degree using PUR FG-205.

        On critical substrates or substrates under elevated stress, prime with PUR FG-205.

        Pre-treat bare MDF panels, edges and cut areas with a suitable sealing primer.

    • Application
      • Airless/airmix spraying / Flow cup gun
      • Application temperature: min. 18 °C max. 25 °C
      • Stir well.

        Spray.

        Flow cup gun: nozzle size: 2.0 - 2.5 mm; atomiser air pressure: 2.0 - 3.0 bar.

        Airmix spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 100 bar, atomiser air pressure: 1.2 - 2 bar.

        Airless spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 120 bar.

        Once dry, carry out intermediate sanding with P 240-320.

        Repeat the process if necessary.

        Intermediate and final coats of suitable products can be applied after drying.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 2 h
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        The time period during which the product can be overcoated without the need for intermediate sanding is based on the information under "Overcoating" (drying time). Once this time period has been exceeded, the surface must be sanded and dusted off immediately prior to further coats.

        Use breathable materials when packing the coated wood building elements.

      • Drying

        Dust-dry: after approx. 30 minutes Overcoating: after approx. 2 hours

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

      • Thinning

        Dilute with V-890 Thinner if necessary

    • Working tools / cleaning
      • Airless/airmix spraying / Flow cup gun
      • Airless/Airmix spraying equipment, flow cup gun

      • Clean tools using WV-891 Brush Wash or V-890 Thinner.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Shelf-life 12 months
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 125 ml - 225 ml / m² per layer applied
      • 125 - 225 ml/m² per coat

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.