• PUR CL-244-Colorlack
  • PUR CL-244-Colorlack
    • PUR CL-244-Colorlack
    • PUR CL-244-Colorlack

    Article No. 514505

    PUR CL-244 Colour Varnish 4 in 1

    Highly pigmented 2K multi-layer coating for use as sealing layer, filler, coloured coating & topcoat

    Variant
    Colour: pure white (RAL 9010) | 5145
    Colour: pure white (RAL 9010) | 5145
    Please choose a colour
    Size / Quantity

    Product specifications

    On delivery

    Density (20°C) Approx. 1.05 g/cm³
    Runout time s in DIN 4 cup Approx. 45 - 60

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors
    • for furniture
    • For professional users only
    • Solid wood and wood-based materials
    • High-quality furniture
    • Exclusive interior design and shop fitting
    • Optimised for airless/airmix applications

    Properties

    • Solvent-based
    • Functions: sealing layer, filler, coloured coating and topcoat
    • Good adhesion on primer films
    • High hiding power
    • High build
    • Good stability (coating suspended surfaces)
    • High mechanical resistance
    • Very high resistance to metal rings
    • Lightfast
    • Fire resistant
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Wood moisture content: 8-12%

        MDF boards: apparent density >= 700 kg/m³

      • Preparations

        Wash off greasy or resin-rich woods/substrates with WV-891 or V-890.

        Sand wood using P 100 - 180 grit.

        Sand panels using P 180 - 320 grit.

        Sand filler using P 240 - 320 grit.

    • Application
      • Airless/airmix spraying / Flow cup gun
      • Application temperature: min. 18 °C max. 25 °C
      • Stir well.

        Spray.

        Flow cup gun: nozzle size: 1.8 - 2.0 mm; atomiser air pressure: 2 - 3 bar.

        Airless spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 120 bar.

        Airmix spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 100 bar, atomiser air pressure: 1.2 - 2 bar.

        Carry out intermediate sanding (P 240 - 320) immediately before further coats.

        Intensive colours, such as yellow, red, etc. may have a lower hiding power due to their pigments. Apply an additional coat if required.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 3 h
      • Drying

        Dust-dry: approx. 30 minutes Overcoating: approx. 3 hours Stacking: after drying overnight

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

      • Thinning

        Ready to use; dilute with V-890, V-897 or V-893 if necessary.

    • Working tools / cleaning
      • Airless/airmix spraying / Flow cup gun
      • Airless/airmix spraying equipment, flow cup gun

      • Clean tools using WV-891 Brush Wash or V-890 Thinner.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Shelf-life 12 months
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 100 - 120 ml / m² per layer applied
      • 100 - 120 ml/m² per coat

    • General information
      • Please refer to the relevant test reports/certificates and the Technical Data Sheet for information on certified products and configurations.

        To preserve the quality of the surface, we recommend regular cleaning and care using a lint-free cotton cloth. Please use solvent-free and silicone-free cleaning agents.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.