• PUR CL-240 Colour Varnish

    Article No. 180101

    PUR CL-240 Colour Varnish

    Flame-resistant, light-fast, two-component colour varnish with excellent hiding power

    Colour:
    special colours price class I | 1801
    Colour: special colours price class I | 1801
    Please choose a colour

    Product specifications

    On delivery

    Binder Acrylate
    Density (20°C) Approx. 1.21 g/cm³
    Odour Characteristic

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors
    • for furniture
    • For professional users only
    • Wood and wood-based materials
    • High-quality furniture
    • Kitchen and bathroom furniture
    • Interior finishing of ships
    • Shop fitting and trade fair stands
    • As a glass varnish (in conjunction with PUR GLA-820)
    • As a metal coating (in conjunction with UMA-824)

    Properties

    • Solvent-based
    • Very good hiding power
    • Excellent flow properties
    • Can also be used on vertical surfaces
    • Excellent resistance to chemicals
    • Resistant to hot water and steam
    • Fire behaviour according to DIN EN 13501-1: C-s1,d0 on suitable substrates
    • Suitable for interior finishing of ships (IMO)
    • Lightfast
    • Pleasant feel
    • Free of aromatic compounds
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Wood moisture content: 8-12%

      • Preparations

        Wash off greasy or resin-rich woods/substrates with WV-891 or V-890. Use UN-894 indoors on the construction site. Ensure good ventilation for solvents.

        Sand wood using P 100 - 180 grit.

        Sand panels using P 180 - 320 grit.

        Sand filler using P 240 - 320 grit.

    • Application
      • Application temperature: min. 18 °C max. 25 °C
      • Airless/airmix spraying / Flow cup gun
      • Stir well.

        Spray.

        Flow cup gun: nozzle size: 1.8 - 2.0 mm; atomiser air pressure: 2 - 3 bar.

        Airless spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 120 bar.

        Airmix spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 100 bar, atomiser air pressure: 1.2 - 2 bar.

        Carry out intermediate sanding (P 240 - 320) immediately before further coats.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 2 h
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        Before coating technically modified woods and wood-based materials, apply the coating to a trial surface and conduct a suitability test on the desired area of use.

        To ensure optimum resistance to metal rings and to improve the resistance to chemicals, we recommend coating with a suitable, light-fast clear varnish.

      • Drying

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

    • Working tools / cleaning
      • Airless/airmix spraying / Flow cup gun
      • Airless/airmix spraying equipment, flow cup gun

        Clean tools using WV-891 Brush Wash or V-890 Thinner.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 100 - 120 ml / m² per layer applied
      • 100 - 120 ml/m² per coat

    • General information
      • DIN EN 71-3 "Migration of certain elements":

        This product complies with the limits for the migration of heavy metals to children's toys according to DIN EN 71-3 and thus fulfils one of several further requirements for the safety of children's toys according to the EU "Toy Directive" (2009/48/EC).

        To preserve the quality of the surface, we recommend regular cleaning and care using a lint-free cotton cloth. Please use solvent-free and silicone-free cleaning agents.

        Please refer to the relevant test reports/certificates and the Technical Data Sheet for information on certified products and configurations.

        For applications according to the Marine Equipment Directive, the maximum wet application quantity is 360 g/m².

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.