Article No. 211930

    Adolit BS 3

    Preservative concentrate with a preventive effect for the temporary protection of wood

    Colour: colourless | 2119
    Size / Quantity

    Brochures

    product.brochures.loading

    Safety instructions

    • Use biocides safely. Always read the label and product information before using!

    Product specifications

    On delivery

    Density (20°C) Approx. 1.0 g/cm³

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • Immediate treatment of logs and sawn wood
    • Prevents the deterioration of wood
    • Pine wood and timber from overseas
    • For warm and humid weather

    Properties

    • Corrosion-resistant towards ST37 (regular steel)
    • Temporary protection against blue stain
    • Economical application concentration
    • Does not contain boron (non-fixing component)
    • Application
      • Application requirements

        Temperature of the material, air and substrate: from +5 °C

      • Qualified specialist companies: brushing, dipping, flow-coating and spraying in closed systems only.

        Average dipping time: approx. 4 minutes

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Application should take place only on an impermeable base, if necessary cover with suitable material (plastic sheets/canvas covers). Treated wood must be stored on a hard, impermeable base until completely dry. Any product residues which have leaked or which have dripped from wood must be collected for re-use or disposal.

        The protection treatment should be done as quick as possible after the felling or the cutting, in any case before the risk of infection in the spring. The treatment must include all surfaces.

        After preceding vapour, e.g. from beech wood, the wood stack must be cooled down (over night) before treating it with this product.

        The duration of effect can be reduzed for pine wood, the application concentration is to be increased accordingly.

        The impregnated wood is to be protected against rainfall and to be stacked airily. The wooden spacers also have to be impregnated with this product.

        The transport of the treated wood in packages or cloes rooms supports the growth of blue stain; the concentration quantity must be increased accordingly in these cases.

    • Working tools / cleaning
      • Brush, dipping system, flow-coating system, spray tunnel, spray machine

      • Clean tools with water immediately after use.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store in well-sealed, original containers, out of the reach of children and in a dry, cool, well-ventilated room which is protected from direct sunlight and frost. No smoking is permitted in storage areas.

    • Usage
      • 150 - 180 ml/m² wood surface, ready-to-use solution (min. 1.5 - 4.0% solution)

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

        European waste code 03 02 02* organochlorinated wood preservatives

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.