• Silicon-Entferner

    Article No. 779983

    Silicone Remover

    Cleaner for removing silicone residues

    Variant
    7799 | Silicone Remover
    Size / Quantity

    Brochures

    product.brochures.loading

    Product specifications

    On delivery

    Density (20°C) Approx. 0.8 g/cm³
    Colour Yellow-brown
    Consistency Paste-like

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • Removing hardened silicone residues
    • Removing silicone streaks from window panes

    Properties

    • Solvent-based
    • Highly effective
    • Low odour
    • Contains solvents
    • Preparation
      • Preparations

        Mechanically remove coarse soiling.

        Adjacent building elements and materials that are not intended to come into contact with the product should be protected using suitable measures.

    • Application
      • Brush
      • Shake before use
      • Application temperature: min. 5 °C max. 30 °C
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C

      • Shake the can vigorously before each use.

        Use a brush to apply the product to the silicone residues.

        Once the product has had sufficient time to act, use a suitable tool to carefully remove the loosened silicone residues.

        Repeat the process if necessary.

        Wash treated surfaces thoroughly with warm soapy water until no more white streaks form.

    • Application instructions
      • Test on an inconspicuous area before use to ensure compatibility.

        Do not use on areas directly exposed to sunlight or on heated surfaces.

    • Working tools / cleaning
      • Brush
      • Brush

      • Clean tools immediately after use with V 101 Thinner.

    • Storage / shelf life
      • Shelf-life 12 months
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Depending on the application / m²
      • Dependent on level of contamination

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.