Article No. 495601
Film for system use with the Power Protect First-Aid Gel
Downloads & documents
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Special film for placing on the Power Protect First-Aid Gel
- Prevents spores from being emitted into the ambient air
- Anti-static 3%
Apply the material.
Apply the film tightly and tape down the edges with adhesive tape.
Using a suitable tool, spread the material out evenly underneath the film.
Storage / shelf life
Keep out of reach of children. Store in unopened original containers in a cool, dry place. Protect from direct sunlight and frost. Store in a well ventilated area. If these requirements are met, the product shelf life is at least 24 months. Do not smoke in areas where the product is stored.
We cannot accept any liability for the service life of the anti-static agents, because these are a migrating additive. Surface resistance values are dependent on storage, handling and humidity.
Deviations from applicable regulations must be agreed separately.
The relevant test certificates must be observed when planning and carrying out work.
Safety / regulations
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.