Article No. 067901

    Power Protect First-Aid Kit

    Kit for mould elimination and immediate binding of spores

    Variant
    0679 | Power Protect First-Aid Kit
    Size / Quantity

    Brochures

    product.brochures.loading

    Product specifications

    On delivery

    Density (20°C) 0.86 g/ml
    Odour Alcohol
    Viscosity Gel-like

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • Immediate binding of mould spores
    • Elimination of mould on mineral substrates and other alcohol-resistant substrates
    • Temporary health protection prior to mould remediation measures

    Properties

    • Prevents spores from being emitted into the ambient air
    • Alcohol-based
    • Blocking effect until mould remediation can be carried out
    • Independent action
    • Deep action
    • Preparation
      • Substrate requirements

        Alcohol-resistant.

      • Preparations

        If necessary, use a suitable device to vacuum off larger fruiting bodies.

    • Application
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to max. +25 °C

      • Using sufficient force, apply the material to the surface being treated.

        Position a suitable dissipative film on top as tightly as possible and tape the edges with adhesive tape.

        Using a suitable tool, spread the material out evenly underneath the film.

    • Application instructions
      • Keep away from sources of ignition, protect against electrostatic charges.

        Use to a distance of approx. 20 cm beyond the visibly contaminated area.

    • Working tools / cleaning
      • Hand applicator and compressed-air gun, wallpaper brush

      • Clean tools immediately after use with water.

    • Storage / shelf life
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Power Protect First-Aid Gel*: approx. 2,000 ml/m² Power Protect First-Aid Sheet: approx: 1 m²/m²

    • General information
      • Keep away from sources of ignition, protect against electrostatic charges.

        Mould remediation measures must be carried out after a maximum of 14 days. Alternatively, re-treat the surface.

        After a maximum of 14 days, remove the film and dispose of it properly.

        Make sure that any material residues that have not dried are disposed of properly.

        Deviations from applicable regulations must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.