Mould prevention

Special mould prevention systems for any application case

Mould inside homes is annoying and can also be potentially harmful, which is why it is important to completely remove all mould. Remmers special mould restoration systems are suitable for all application cases and not only fight existing mould but also prevent new mould infestation. In just one step, the interior is protected against moisture and has additional heat insulation. In this way, Remmers products contribute to long-term improvement of the room hygiene - guaranteed.

Power Protect is a natural product made of modified perlite, a volcanic glass, and is a verifiably responsibly produced product. This is why it bears the ‘Blue Angel’ stamp.

iQ-Therm 30 combines the benefits of highly heat-insulating, organic insulating material, with the absorbent properties of a mineral mortar. iQ-Therm 30 is streamlined, moisture regulating and highly heat-insulating, which makes it our most powerful mould restoration system.

The Mould Restoration Render by Remmers is suitable for single-layer coats that are 20 to 50 mm thick. The hardened render is water vapour permeable, has a good capillary conductivity and accelerates drying of moisture surfaces. It also has heat insulating properties thanks to its low thermal conductivity coefficient.

Color SA plus is not just a forward-thinking problem-solver for rooms infested with mould, the coating is also ideal for all areas where a healthy and hygienic room climate needs to be created (kindergartens, schools, nursing homes and hospitals or care centres).

Mould prevention

19 products found
 

View:

Article No. 0400

WTA-compliant preparatory mortar

Article No. 0725

Aqueous deep primer with strengthening and hydrophobising properties

Article No. 2909

Article No. 1072

Mineral primer with highly strengthening effect

Article No. 3880

E-glass reinforcement fabric covered with polymeric plastics

Article No. 2990

Solvent-free and plasticiser-free special primer for binding mould spores

Article No. 0693

Active special cleaner for removing biological coatings

Article No. 0260

Bedding mortar in the Power Protect [eco] system

Article No. 0262

Insulating board for environmentally sustainable mould control

Article No. 0264

Wedge-shaped insulating board in the Power Protect [eco] system

Article No. 0265

Reveal board in the Power Protect [eco] system

Article No. 0261

Surface filler and fine plaster in the Power Protect [eco] system

Article No. 1050

Capillary active, climate-regulating render, in particular for mould control

Article No. 2997

Mould remediation filler, fine

Article No. 2991

Silica-based, capillary-active interior wall paint. A component in the Remmers Mould Remediation System

Article No. 2984

High quality, low-emission interior wall paint with micro-silver as a film preservative for protection against fungal attack

Article No. 0679

Kit for mould elimination and immediate binding of spores

Article No. 0684

Fungicidal gel for elimination of mould and immediate binding of spores