Coloured blinded system with highly structured surface for heavy mechanical loads.
The fundamentals for safe working environments
Remmers floor coatings are solvent-free and physiologically safe after curing. The suitability as an application for seamless floors in the food industry and in car parks have been tested and confirmed by external institutes. The systems are distinguished thanks to their high mechanical and good chemical resistance.
Efficient systems can be created from a combination of special epoxy resin binding agents and fillers that are suitable for various application areas. Flexible and safe at the same time - Remmers Crete PU-concrete is the perfect combination of water-basedd polyol emulsion and polyurethane binding agent made of polymer MDI. This makes the floor extremely resistant to thermal, chemical and mechanical loads.
But even where there are no high mechanical requirements, the Remmers product range with its unique sealants offers a variety of possibilities to meet the requirements of "decorative and slip-resistant" flooring.
Thanks to these and many other properties, these products and systems have proven themselves for decades as excellent flooring systems in the industry where anti-slip and ease of cleaning must go hand in hand.
Multicolour blinded system with highly structured surface for heavy mechanical loads.
Temperature-resistant, chemical-resistant, coloured blinded system with quartz sand blinded coating.
For many synthetic resin coatings, the thermal stresses caused by hot liquids are simply too much. When Remmers Crete BL 120 is used as a base layer in combination with optional quartz sand blinding, this system can withstand temperatures of up to 110°C. This configuration also ensures the required level of slip resistance.
For many synthetic resin coatings, the thermal stresses caused by hot liquids are simply too much. When Remmers Crete BL 120 is used as a base layer in combination with quartz sand blinding and a topcoat, this system can withstand temperatures of up to 120°C. This configuration also ensures the required level of slip resistance..
Heavy loads on small wheels, these are the highest demands on any floor. Remmers Crete RT 130 was developed for the most demanding applications. It withstands heavy impact and shock loads and shows its full performance even at temperatures of 130 °C for short periods. The scrapeable flooring can also be installed safely on steeper slopes.
Slip-resistant systems10 products found