Article No. 290905
Downloads & documents
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Friable and sanding plaster, old lime and mineral paint, and chalking coatings
- Concrete, fibre-cement boards, fair-faced brick, mineral renders (DIN 18550, MG PII and PIII), interior plaster, lightweight concrete, gypsum render, gypsum plasterboards, fibreboard and pressed board
Properties
- Strengthens
- Contains solvents
- Alkali-resistant
- High penetration capacity
-
Preparation
-
Substrate requirements
Clean, dry and free of cracks.
-
-
Application
-
Shake well before use.
Apply material evenly by brush or roller.
Do not let excess material build up on the surface.
-
Application instructions
-
Do not use tools with synthetic bristles.
-
-
Working tools / cleaning
-
After use and before prolonged interruptions of work clean tools with Thinner V 101.
-
Storage / shelf life
-
Protect containers from temperatures above 30°C and store in a dry place.
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
Use the contents of open containers as quickly as possible.
-
Usage
-
Apply to a large enough trial area to determine the precise amount required.
-
General information
-
The current technical regulations must be observed.
Deviations from applicable regulations must be agreed separately.
Always set up a trial area/trial areas first.
-
-
Disposal instructions
-
Dispose of contents/container in accordance with local/regional/national/international regulations.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-