• Traffic Film Remover

    Article No. 067105

    Traffic Film Remover

    Surfactant solution for removing grime, dirt incrustation, dust, oil and grease deposits

    Variant
    0671 | Traffic Film Remover
    Size / Quantity

    Product specifications

    On delivery

    Appearance Clear solution
    Density (20°C) 1.00 kg/l
    pH value (20 °C) Approx. 11.5
    Surfactant content Approx. 10%

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls indoors and outdoors
    • Removing grime, dirt incrustation, dust, oil and grease deposits
    • Mineral substrates
    • Floors and walls

    Properties

    • Water-based
    • Highly washing active
    • High-yielding concentrate
    • Low-foaming
    • Can be used for manual or machine cleaning
    • Biodegradable
    • Preparation
      • Preparations

        Mechanically remove coarse soiling.

        Moisten the surface to be cleaned with water.

        Depending on the intensity of the contamination, produce a dilution with a concentration of 1:5 to 1:20.

        Set up a trial area to determine the cleaning effect.

    • Application
      • Application temperature: min. 5 °C max. 30 °C
      • Scrub brush / Scrubber / High pressure cleaner
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C

      • Use a suitable tool to apply the solution that has been prepared for the contamination at hand.

        Work in the material using a scrubbing brush.

        When using a high-pressure cleaner, pour approx. 0.5% of the product into the bypass tank.

        Wash off thoroughly.

        Remove cleaning agent until no residues remain.

        If needed, repeat the application.

    • Application instructions
      • Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

        Set up the necessary collection receptacles.

    • Working tools / cleaning
      • Scrub brush / Scrubber / High pressure cleaner
      • Scrubbing brush, high-pressure cleaner, steam jet

      • Clean tools with water immediately after use.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • At least 36 months in unopened, original containers stored cool, dry and protected from frost.

    • Usage
      • Total application/absorption rate 10 ml - 50 ml Total / m²
      • Approx. 0.01 – 0.05 ml/m² depending on the type of contamination

      • Apply to a large enough trial area to determine the precise amount required.

    • General information
      • Residue left from cleaning may have a negative influence on subsequent impregnation.

        The applicable regulations and legal requirements must be observed.

        Always set up a trial area/trial areas first.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.