• Framework paste

    Article No. 112110

    Framework paste

    Spreadable concrete separating agent

    Variant
    1121 | Framework paste
    Size / Quantity

    Brochures

    product.brochures.loading

    Product specifications

    On delivery

    Density (20°C) 0.83 g/cm³
    Colour whitish
    Flash point > 60
    Consistency paste-like

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors and outdoors
    • Non-asborbent framework
    • For use in prefabricated components

    Properties

    • Universal use with a wide range of formworks
    • Excellent release action, weather-resistant and non-damaging to the formwork
    • Spreadable
    • Preparation
      • Substrate requirements

        Clean any dirt or wax off the formwork.

      • Preparations

        Before using new wooden formwork for the first time, coat with a sufficient quantity of cement paste. Brush off the next day and treat with release agent.

    • Application
      • Apply standing
      • By brush 1x
      • Application temperature: min. 5 °C max. 30 °C
      • Application requirements

        Temperature of material, surroundings and substrate: min +5 °C up to max. +30 °C

      • Ready to use, straight from the container.

        Apply a thin layer of the material.

        Do not let excess material build up on the surface.

    • Working tools / cleaning
      • Apply standing
      • By brush 1x
      • short-haired brushes, whitewash brush, rubber slider, cloth

      • Clean tools immediately after use with V 101 Thinner.

    • Storage / shelf life
      • Shelf-life 24 months
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.

    • Usage
      • Depending on the application / m²
      • Non-absorbent framework: approx. 1 l/ 30-50 m²

    • General information
      • Remove all material residue from the concrete surface before applying any coatings.

        Deviations from applicable regulations must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.